BR-PV-UV紫外預處理試驗機簡介：
執行IEC 61215-2:2016等光伏組件紫外預處理試驗標準，廣泛用于光伏組件及材料耐紫外線試驗...
2. 工控觸摸屏+PLC可編程控制器控制，或微機(上位機)控制，Windows XP操作平臺。
3. 自動監控輻照度的均勻性，超出±15%自動停機。
4. 特別設計的風道循環系統，確保負載時試驗溫度60℃±5℃標準要求。
5. 采用原裝進口熒光紫外燈管，滿足不同標準試驗條件。
6. 光輻照度連續可調、可控，確保輻照度精度±15%標準要求
7. 測量范圍：280~320nm及280~400nm
8. 測試面上組件接受的最小輻射量為：紫外光源在280nm~385/400nm的范圍內15KWH/m2
同時確保280~400nm輻照度<250W/m2標準要求，只需確認執行標準，儀器自動完成指定的試驗
9. 全程掃描功能：光電傳感器全程掃描，自動監控輻照度及均勻度
10. 數據及曲線存儲、打印功能....
11. 相關測試：EVA交聯度、剝離強度、透光率...

BR-PV-UV-Preconditioning(UV resistance) Tester
BR-PV-UV UV Preconditioning Testing Chamber

Implementation of standards: IEC 61215-2:2016

System integration many technical highlights, such as centralized control, automatic dimming, servo drive, full panoramic scanning, automatic monitoring irradiation uniformity, database system etc.
With touch control screen, full automatic, high precision system loop (lateral and longitudinal drive), Any mechanical action, by PLC locking. Including radiation probe Automatic full panoramic scanning, irradiance automatic integration, data acquisition and storage, automatic storage scanning data etc.
Irradiation uniformity: better than ±15%
A calibrated UV irradiation sensor (NIST trace to the source), mounted on the transmission shaft, for IEC 61215:2005 and IEC 61646:2008 to 280~385nm and 280~400nm irradiation measurement.
280~320nm to total UV ratio measured by spectrometer.
A special guide rail, can easily push and pull module.
Uniform temperature distribution, maintaining the module temperature at 60°C±5°C.
Ultraviolet fluorescent lamps are cold light source without lower than 280nm UVC irradiation, to avoid the photochemical reaction of ozone synthesis, is important test conditions for IEC standard.
UVB and UVA ultraviolet fluorescent lamps, respectively for 280~385nm and 280~400nm test.
The lamps distance adjustable, asymmetric arrangement, easy to adjust the irradiation uniformity.